{"id":1080,"date":"2020-01-18T19:24:52","date_gmt":"2020-01-18T11:24:52","guid":{"rendered":"http:\/\/www.liout.com\/?p=1080"},"modified":"2020-01-18T19:24:52","modified_gmt":"2020-01-18T11:24:52","slug":"2020%e5%b9%b4%e8%b7%91%e6%bb%a1%e5%ae%b6%e7%94%a8%e5%8d%83%e5%85%86%e7%bd%91%e7%bb%9c%e7%9a%84200%e5%85%83%e7%9a%84%e8%bd%af%e8%b7%af%e7%94%b1ap%e4%b8%80%e5%a5%97%e8%a7%a3%e5%86%b3%e6%96%b9%e6%a1%88","status":"publish","type":"post","link":"https:\/\/www.edumails.cn\/en\/2020%e5%b9%b4%e8%b7%91%e6%bb%a1%e5%ae%b6%e7%94%a8%e5%8d%83%e5%85%86%e7%bd%91%e7%bb%9c%e7%9a%84200%e5%85%83%e7%9a%84%e8%bd%af%e8%b7%af%e7%94%b1ap%e4%b8%80%e5%a5%97%e8%a7%a3%e5%86%b3%e6%96%b9%e6%a1%88.html","title":{"rendered":"2020 run full home gigabit network $200 soft router + AP A set of solutions"},"content":{"rendered":"

<\/p>\n

My device in the picture:
\nAP: Fusion K3 D1 version, official change firmware ($400)<\/span>
\nBypass Routing: N1 Box ($139)<\/span>
\nDual male USB cable (for N1 downgrade)<\/span>
\nHDMI cable (for N1 to monitor)<\/span>
\nUSB flash drive (for N1 brushing)<\/span><\/span>
\n200 program:<\/span><\/span><\/strong>
\nWireless AP: Barley DW33D (Idle Fish, $80)
\nSoft Routing: N1 Box
\nText version:<\/p>\n

K3 set up first:<\/span><\/div>\n

 <\/p>\n

in the first place<\/strong><\/span><\/span>To know the static intranet IP of your APs<\/span><\/span>Address.<\/span><\/span>For example, many routers are 192.168.1.1<\/span><\/span>As its static<\/span><\/span>IP<\/span><\/span><\/p>\n

I provide a program: AP plugged in and powered on, any of your devices connected to this AP, and then you look at the connection properties, mainly look at the DHCP server, the IP of this DHCP server is your static intranet address of this AP.<\/span><\/span><\/div>\n

 <\/p>\n

cloture<\/span><\/span>DHCP<\/span><\/span>functionality<\/span><\/span><\/p>\n

 <\/p>\n

 <\/p>\n

N1 work<\/span><\/span><\/span><\/div>\n

 <\/p>\n

    \n
  • \n
      \n
    • \n
        \n
      • Get the N1.<\/strong><\/span><\/span>(math.) genus<\/span><\/span>network cable<\/span><\/span><\/span>Connect your computer.<\/span><\/span>HDMI<\/span><\/span><\/span>Connect the monitor, then connect the<\/span><\/span>Power supply (<\/span><\/span><\/span>Powered By<\/span><\/span><\/span>::<\/span><\/span><\/span>U97F3<\/span><\/span><\/span>)<\/span><\/span><\/span><\/li>\n
      • press Ctrl-Alt-Delete<\/strong><\/span><\/span>View<\/span><\/span>N1<\/span><\/span>Firmware version number, greater than<\/span><\/span>2.19<\/span><\/span>The firmware should be downgraded before flashing, and the downgrade needs to be connected to the<\/span><\/span>dual male line<\/span><\/span><\/span><\/li>\n
      • relegate<\/strong><\/span><\/span>Connect it.<\/span><\/span>dual male line<\/span><\/span><\/span>The first step is to brush the downgrade package with the [Downgrade Tool].<\/span><\/span><\/li>\n
      • Use your computer to write the system into<\/strong><\/span><\/span>U<\/strong><\/span><\/span>classifier for coils of wire<\/strong><\/span><\/span>With [<\/span><\/span>Etcher<\/span><\/span>], put<\/span><\/span>OpenWRT<\/span><\/span>(hereinafter referred to as<\/span><\/span>OP<\/span><\/span>(or other system image files) flashed into the<\/span><\/span>U<\/span><\/span>classifier for coils of wire<\/span><\/span><\/li>\n<\/ul>\n<\/li>\n
      • <\/li>\n<\/ul>\n<\/li>\n<\/ul>\n

         <\/p>\n

          \n
        • \n
            \n
          • \n
              \n
            • set up<\/strong><\/span><\/span>U<\/strong><\/span><\/span>disk drive<\/strong><\/span><\/span>With [<\/span><\/span>N1<\/span><\/span>activation<\/span><\/span>U<\/span><\/span>Disk Boot Utility] allows<\/span><\/span>N1<\/span><\/span>Priority use<\/span><\/span>U<\/span><\/span>The disk boots (actually, it boots through the<\/span><\/span>ip ssh<\/span><\/span>until (a time)<\/span><\/span>N1<\/span><\/span>Then use the<\/span><\/span>adb<\/span><\/span>(change of start-up sequence)<\/span><\/span><\/li>\n
            • take part in<\/strong><\/span><\/span>U<\/strong><\/span><\/span><\/span>classifier for coils of wire<\/strong><\/span><\/span><\/span>Reboot.<\/span><\/span>N1<\/span><\/span>(<\/span><\/span>reboot<\/span><\/span>), reboot and enter the<\/span><\/span>OpenWRT<\/span><\/span><\/li>\n<\/ul>\n<\/li>\n
            • <\/li>\n<\/ul>\n<\/li>\n<\/ul>\n

               <\/p>\n

                \n
              • \n
                  \n
                • \n
                    \n
                  • expense or outlay<\/strong><\/span><\/span>U<\/strong><\/span><\/span>The system on the disk (<\/strong><\/span><\/span>OP<\/strong><\/span><\/span>(or other), flashing the system into the<\/strong><\/span><\/span>N1<\/strong><\/span><\/span>Local storage (<\/strong><\/span><\/span>EMMC<\/strong><\/span><\/span>)<\/strong><\/span><\/span><\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n
                    Different systems have different ways of flashing the system into the N1's local storage, and even many directly plug in a USB flash drive, enter the USB flash drive's OpenWRT management page (note that it's not CommandLine Interface), and log in directly with the default password, and then you can click on the web page's backstage buttons to one-click flash the OpenWRT system into the EMMC (the N1 box's local storage), and this process is known as flashing. This process is called flashing.<\/span><\/span><\/div>\n
                    My flippy's Lean OpenWRT (version 21+) is straightforward:<\/span><\/span><\/div>\n
                    # cd ~<\/span><\/span><\/span><\/div>\n
                    # . \/inst-to-emmc.sh<\/span><\/span><\/span><\/div>\n

                     <\/p>\n

                      \n
                    • \n
                        \n
                      • \n
                          \n
                        • configure<\/strong><\/span><\/span>N1<\/strong><\/span><\/span>Pull out<\/span><\/span>U<\/span><\/span>After disk brushing is complete, unplug the<\/span><\/span>U<\/span><\/span>Disk, restart (<\/span><\/span>reboot<\/span><\/span>)<\/span><\/span>N1<\/span><\/span>This is when you enter the<\/span><\/span>N1<\/span><\/span>Your own system that you've brushed up on.<\/span><\/span>OP<\/span><\/span>(or other)<\/span><\/span><\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n
                          At this point, since it is carrying out the configuration phase where more situations arise, I'll confirm with you the connection status of the N1 to the host computer so as not to be confused:<\/span><\/span><\/div>\n

                           <\/p>\n

                            \n
                          • \n
                              \n
                            • \n
                                \n
                              • U<\/span><\/span>The disk has been pulled out.<\/span><\/span><\/li>\n
                              • HDMI<\/span><\/span>Wire to the monitor<\/span><\/span><\/li>\n
                              • N1<\/span><\/span>to your computer with a network cable using the single network port of the<\/span><\/span><\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n
                                Configure the N1 operation:<\/span><\/span><\/div>\n

                                 <\/p>\n

                                  \n
                                • \n
                                    \n
                                  • \n
                                      \n
                                    • reticulation<\/span><\/span>\u00a0–\u00a0<\/span><\/span>connector<\/span><\/span>\u00a0- Lan<\/span><\/span>mouth<\/span><\/span>\u00a0–\u00a0<\/span><\/span>Modify the<\/span><\/span>Lan<\/span><\/span>mouth<\/span><\/span>IPV4<\/span><\/span>The address is changed to the same address as the<\/span><\/span>AP<\/span><\/span>The same network segment (e.g.<\/span><\/span>AP<\/span><\/span>Static intranet address:<\/span><\/span>192.168.2.1<\/span><\/span>Well, at first.<\/span><\/span>N1<\/span><\/span>The static network address of the<\/span><\/span>192.168.1.1<\/span><\/span>I've got to put<\/span><\/span>N1<\/span><\/span>(used form a nominal expression)<\/span><\/span>LAN<\/span><\/span>mouth<\/span><\/span>IPV4<\/span><\/span>Change the address to<\/span><\/span>192.168.2.2<\/span><\/span>or other<\/span><\/span>192.168.2.XXX<\/span><\/span>address)<\/span><\/span><\/li>\n
                                    • reticulation<\/span><\/span>\u00a0–\u00a0<\/span><\/span>connector<\/span><\/span>\u00a0- Lan<\/span><\/span>mouth<\/span><\/span>\u00a0–\u00a0<\/span><\/span>Modify the<\/span><\/span>Lan<\/span><\/span>mouth<\/span><\/span>DNS<\/span><\/span>The server and gateway are all filled in as<\/span><\/span>AP<\/span><\/span>The static network address, which is very important, was not filled in by me because I did not fill in the<\/span><\/span>DNS<\/span><\/span>server is<\/span><\/span>AP<\/span><\/span>Static intranet address, got it until 3am, hence this post to summarize the pitfalls<\/span><\/span><\/li>\n
                                    • reticulation<\/span><\/span>\u00a0–\u00a0<\/span><\/span>connector<\/span><\/span>\u00a0- Lan<\/span><\/span>mouth<\/span><\/span>\u00a0–\u00a0<\/span><\/span>Modification, the following<\/span><\/span>DHCP<\/span><\/span>If you click on the second tab, check the \"Force\" box to force the use of the<\/span><\/span>N1<\/span><\/span>act as<\/span><\/span>DHCP<\/span><\/span>server (computer)<\/span><\/span><\/li>\n
                                    • reticulation<\/span><\/span>\u00a0–\u00a0<\/span><\/span>firewalls<\/span><\/span>\u00a0–\u00a0<\/span><\/span>Customize the rules to add an article:<\/span><\/span><\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n
                                      iptables -t nat -I POSTROUTING -o eth0 -j MASQUERADE<\/span><\/span><\/span><\/div>\n

                                       <\/p>\n

                                        \n
                                      • \n
                                          \n
                                        • grout<\/strong><\/span><\/span>N1<\/strong><\/span><\/span>together with<\/strong><\/span><\/span>AP<\/strong><\/span><\/span>(My)<\/span><\/span>AP<\/span><\/span>be<\/span><\/span>K3<\/span><\/span>).<\/span><\/span>AP<\/span><\/span>(used form a nominal expression)<\/span><\/span>WAN<\/span><\/span>port to an optical cat or a network cable connected from outside.<\/span><\/span>AP<\/span><\/span>(used form a nominal expression)<\/span><\/span>LAN<\/span><\/span>port and<\/span><\/span>N1<\/span><\/span>The single network port of the device is connected, reboot everything, and wait for it to boot up, then you can configure Science\u2642 to access the Internet<\/span><\/span><\/li>\n<\/ul>\n<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

                                          Figure my equipment: AP: Fusion K3 D1 version, the official change of firmware (400 yuan) Bypass Route: N1 box (139 yuan) Dual male USB cable (N1 degradation with) HDMI cable (N1 to connect to the monitor with) USB flash drive (N1 brushing with) 200 yuan program: Wireless AP: Damei DW33D (Idle Fish, 80 yuan) Soft Route: N1...<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[5],"tags":[],"topic":[],"_links":{"self":[{"href":"https:\/\/www.edumails.cn\/en\/wp-json\/wp\/v2\/posts\/1080"}],"collection":[{"href":"https:\/\/www.edumails.cn\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.edumails.cn\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.edumails.cn\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.edumails.cn\/en\/wp-json\/wp\/v2\/comments?post=1080"}],"version-history":[{"count":0,"href":"https:\/\/www.edumails.cn\/en\/wp-json\/wp\/v2\/posts\/1080\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.edumails.cn\/en\/wp-json\/wp\/v2\/media?parent=1080"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.edumails.cn\/en\/wp-json\/wp\/v2\/categories?post=1080"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.edumails.cn\/en\/wp-json\/wp\/v2\/tags?post=1080"},{"taxonomy":"topic","embeddable":true,"href":"https:\/\/www.edumails.cn\/en\/wp-json\/wp\/v2\/topic?post=1080"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}